OpenHarmony版本支持USB接口摄像头吗？

我想使用 RK3568 平台，测试USB接口摄像头，用OpenHarmony版本自带的相机APP使用USB接口摄像头拍照。

请问下，OpenHarmory版本是否支持USB接口摄像头？如果支持的话，从哪个版本开始支持的？需要如何配置USB接口摄像头？相机APP能否直接调用USB接口摄像头？

在OpenHarmony 4.0 Release版本上测试，接入USB摄像头，串口打印如下日志：

[ 1975.251241] usb 1-1: new high-speed USB device number 5 using ehci-platform [ 1975.400438] usb 1-1: New USB device found, idVendor=2bdf, idProduct=0281, bcdDevice=30.00 [ 1975.400542] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1975.400583] usb 1-1: Product: 2K USB Camera [ 1975.400618] usb 1-1: Manufacturer: 04014008_P040300_SN0002 [ 1975.400650] usb 1-1: SerialNumber: 04014008_P040300_SN0002 [ 1975.407091] uvcvideo: Found UVC 1.00 device 2K USB Camera (2bdf:0281) [ 1975.418923] rockchip-cpuinfo cpuinfo: failed to get id cell: -517

[ 1975.424520] [E/HDF_AUDIO_USB] [AudioUsbDriverInit][line:139]: usb device is not support [ 1975.424560] [E/HDF_AUDIO_USB] [LinuxAudioUsbProbe][line:164]: AudioUsbDriverInit is failed [ 1975.424910] hdf-audio-usb: probe of 1-1:1.2 failed with error -1 [ 1975.426312] [I/USB_PNP_NOTIFY] UsbPnpNotifyCallback: action=0x1 [ 1975.426369] [I/USB_PNP_NOTIFY] UsbPnpNotifyAddInitInfo:209 i=0, interfaceInfo=0xe-0x1-0x0-0x0 [ 1975.426397] [I/USB_PNP_NOTIFY] UsbPnpNotifyAddInitInfo:209 i=1, interfaceInfo=0xe-0x2-0x0-0x1 [ 1975.426422] [I/USB_PNP_NOTIFY] UsbPnpNotifyAddInitInfo:209 i=2, interfaceInfo=0x1-0x1-0x0-0x2 [ 1975.426444] [I/USB_PNP_NOTIFY] UsbPnpNotifyAddInitInfo:209 i=3, interfaceInfo=0x1-0x2-0x0-0x3 [ 1975.426527] [I/USB_PNP_NOTIFY] UsbPnpNotifyReportThread: UsbPnpNotifyReportThread start! [ 1975.426598] [I/USB_PNP_NOTIFY] UsbPnpNotifyHdfSendEvent:375 device information, 3 usbDevAddr=18446743524918679552, devNum=5, busNum=1, infoTable=4-0x2bdf-0x281!

日志提示usb device is not support，跟踪代码发现，USB只支持UAC（USB Audio Class），不支持UVC（USB Video Class），USB摄像头需要支持UVC，看来目前最新的OpenHarmony 4.0 Release版本不支持USB接口摄像头。

不知道Release版本什么时候可以支持USB摄像头？

可以直接调用，插入就可以。默认的系统相机app没有选择摄像头的功能。底层驱动和框架都是支持的